ACCESSORIES - CASE FEET |
|
|
|
|
| Home Page l Accessories Menu |
| TILT FOOT BAR | ||||||||
 |
 |
 |
||||||
Part #
Off-white RAL 9002* |
Part # Black RAL 9005* |
Contents of kit
|
For OKW cases.. |
Drawings |
||||
ABS tilt foot bar kit - side length 43mm
|
SHELL-TYPE 110/155
FLAT-PACK HAND-HELD P & M Also for non-OKW cases |
|
|
|||||
ABS tilt foot bar kit - side length 81mm
|
||||||||
| 2 ant-slide self-adhesive feet | ||||||||
| Notes: * These tilt foot bars can be fitted to any plastic enclosure with a wall thickness of 2.5 mm to 4 mm |
||||||||
| CASE FEET | ||||||||
 |
 |
|
||||||
Part #
Kit without tilt legs |
Part # Kit with tilt legs |
Contents
|
Contents of kit
|
Metric Drawings |
||||
| Gray, RAL 7035 | 4 ABS feet, 4 non-slip inserts & screws
|
|
|
|||||
| Gray, RAL 7035 | 4 ABS feet, 4 non-slip inserts, two tilt legs & screws | |||||||
| Off-white, RAL 9002 | 4 ABS feet, 4 non-slip inserts & screws
|
|
||||||
| Off-white, RAL 9002 | 4 ABS feet, 4 non-slip inserts, two tilt legs & screws | |||||||
| Black, RAL 9005 | 4 ABS feet, 4 non-slip inserts & screws
|
|
||||||
| Black, RAL 9005 | 4 ABS feet, 4 non-slip inserts, two tilt legs & screws | |||||||
| Notes: * The enclosure must be drilled in order to fit the feet |
||||||||
| SMALL CASE FEET & TILT BARS | |||||||
 |
 |
 |
|
||||
Part #
Ø6.5 x 2 mm (2 Pieces) |
Part # Ø10 x 2.9 mm (2 Pieces) |
Part # |
Description |
||||
Transparent silicon with self-adhesive backing
|
|||||||
 |
 |
||||||||||||||||||||
|
|||||||||||||||||||||
Last Updated:
25-Feb-2010
©OKW Enclosures, Inc. USA. All rights reserved. |
|||||||||||||||||||||
