![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DIATEC XS & S | |||||||||
![]() |
![]() |
![]() |
|||||||
Part #
DIATEC Off-White |
Part #
DIATEC Lava Gray |
Description |
Dimensions in mm |
Drawings |
|||||
W |
L |
H |
|||||||
DIATEC XS |
150 |
155 |
37 |
||||||
DIATEC S |
210 |
200 |
48 |
||||||
| DIATEC M & L | |||||||||
![]() |
![]() |
![]() |
|||||||
Part #
DIATEC Off-White |
Part #
DIATEC Lava Gray |
Description |
Dimensions in mm |
Drawings |
|||||
W |
L |
H |
|||||||
DIATEC M |
270 |
200 |
48 |
||||||
DIATEC L |
330 |
200 |
48 |
||||||
| HINGED LIDS for sizes S & M |
||||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||||||
| For Case | Part # Hinged Lid S Solid ABS |
Part # Hinged Lid S Translucent Polycarbonate |
Part # Hinged Lid S Transparent Polycarbonate |
Part # Hinged Lid M Solid ABS |
Part # Hinged Lid M Translucent Polycarbonate |
Part # Hinged Lid M Transparent Polycarbonate |
||||||
| Off-White | ||||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|||||||
Part # Hinged Lid S Solid ABS |
Part # Hinged Lid S Translucent Polycarbonate |
Part # Hinged Lid S Transparent Polycarbonate |
Part # Hinged Lid M Solid ABS |
Part # Hinged Lid M Translucent Polycarbonate |
Part # Hinged Lid M Transparent Polycarbonate |
|||||||
| Lava Gray | ||||||||||||
| Notes: * Drill two Ø4 mm holes in the top panel to fit the hinged lids. Pilot holes on the underside of the top panel make this very easy. |
||||||||||||
| ACCESSORIES | ||||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||||||
| For.. | Part # Internal Slot-in Panel* |
Part # Battery Contacts 2 x 1.5V AA |
Part # 9V Battery Lead |
Part # Non-slip Feet (1 Pair) |
Part # Torx 10 Screw Ø3 x 8 mm* (1 Piece) |
Part # PCB Screw PZ1 Ø3 x 8 mm* (1 Piece) |
||||||
| Diatec XS | ||||||||||||
| Diatec S, M & L | ||||||||||||
| Notes: * Internal Slot-in Panel - This allows the electronics section to be separated from the battery compartment, terminal and wall mounting area. Thus, the device can be installed by the engineer without opening the electronics section. * Torx 10 screw - security screw for mounting PCBs and components in all models. Also, can be used to assemble XS case (2 pcs needed) * PCB screw - self-tapping 'plastite' screw for mounting PCBs and components to the internal screw pillars - PZ1 screwdriver size |
||||||||||||
|
||||||||||||||||||||||
Last Updated:
18-Nov-2011
©OKW Enclosures, Inc. USA. All rights reserved. |
||||||||||||||||||||||