Advanced Search Part-No.
Login / Registration Your location/language Canada, English
AltText

C2306917

Pressure equalization element M6x0.030"

Pressure equalization elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).

Supply

1 pressure equalization element, 1 seal washer, 1 nut

  • To be used for
AltText

C0080801

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C0080801

Case shell 3.150", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x0.79″
AltText

C0080802

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C0080802

Case shell 3.150", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x0.79″
AltText

C0081201

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C0081201

Case shell 3.150", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x0.79″
AltText

C0081202

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C0081202

Case shell 3.150", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x0.79″
AltText

C0081601

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C0081601

Case shell 3.150", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x0.79″
AltText

C0081602

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C0081602

Case shell 3.150", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x0.79″
AltText

C0082401

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C0082401

Case shell 3.150", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x0.79″
AltText

C0082402

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C0082402

Case shell 3.150", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x0.79″
AltText

C0121201

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0121201

Case shell 4.724", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x1.18″
AltText

C0121202

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0121202

Case shell 4.724", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x1.18″
AltText

C0122001

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0122001

Case shell 4.724", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x1.18″
AltText

C0122002

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0122002

Case shell 4.724", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x1.18″
AltText

C0122401

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0122401

Case shell 4.724", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x1.18″
AltText

C0122402

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0122402

Case shell 4.724", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x1.18″
AltText

C0161601

Case shell 6.299", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0161601

Case shell 6.299", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x1.18″
AltText

C0161602

Case shell 6.299", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0161602

Case shell 6.299", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x1.18″
AltText

C0162401

Case shell 6.299", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0162401

Case shell 6.299", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x1.18″
AltText

C0162402

Case shell 6.299", with tongue Case shell with thread and fixing towers as separate part.´Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C0162402

Case shell 6.299", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x1.18″
AltText

C1080801

Case shell 3.150", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1080801

Case shell 3.150", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x1.57″
AltText

C1080802

Case shell 3.150", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1080802

Case shell 3.150", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x1.57″
AltText

C1081201

Case shell 3.150", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1081201

Case shell 3.150", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x1.57″
AltText

C1081202

Case shell 3.150", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1081202

Case shell 3.150", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x1.57″
AltText

C1081601

Case shell 3.150", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1081601

Case shell 3.150", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x1.57″
AltText

C1081602

Case shell 3.150", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1081602

Case shell 3.150", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x1.57″
AltText

C1082401

Case shell 3.150", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1082401

Case shell 3.150", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x1.57″
AltText

C1082402

Case shell 3.150", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1082402

Case shell 3.150", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x1.57″
AltText

C1121201

Case shell 4.724", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1121201

Case shell 4.724", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x1.18″
AltText

C1121202

Case shell 4.724", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1121202

Case shell 4.724", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x1.18″
AltText

C1122001

Case shell 4.724", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1122001

Case shell 4.724", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x1.18″
AltText

C1122002

Case shell 4.724", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1122002

Case shell 4.724", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x1.18″
AltText

C1122401

Case shell 4.724", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1122401

Case shell 4.724", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x1.18″
AltText

C1122402

Case shell 4.724", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1122402

Case shell 4.724", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x1.18″
AltText

C1161601

Case shell 6.299", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1161601

Case shell 6.299", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x1.18″
AltText

C1161602

Case shell 6.299", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1161602

Case shell 6.299", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x1.18″
AltText

C1162401

Case shell 6.299", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1162401

Case shell 6.299", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x1.18″
AltText

C1162402

Case shell 6.299", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C1162402

Case shell 6.299", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x1.18″
AltText

C1203001

Case shell 7.874", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1203001

Case shell 7.874", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.81″x7.87″x1.57″
AltText

C1243601

Case shell 9.449", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C1243601

Case shell 9.449", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
14.17″x9.45″x1.57″
AltText

C2008081

ROBUST-BOX WIDTH 3.150", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealeing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2008081

ROBUST-BOX WIDTH 3.150", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x2.36″
IP 66
AltText

C2008082

ROBUST-BOX WIDTH 3.150", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2008082

ROBUST-BOX WIDTH 3.150", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x2.36″
IP 66
AltText

C2008121

ROBUST-BOX WIDTH 3.150", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2008121

ROBUST-BOX WIDTH 3.150", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x2.36″
IP 66
AltText

C2008122

ROBUST-BOX WIDTH 3.150", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2008122

ROBUST-BOX WIDTH 3.150", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x2.36″
IP 66
AltText

C2008161

ROBUST-BOX WIDTH 3.150", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2008161

ROBUST-BOX WIDTH 3.150", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x2.36″
IP 66
AltText

C2008162

ROBUST-BOX WIDTH 3.150", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2008162

ROBUST-BOX WIDTH 3.150", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x2.36″
IP 66
AltText

C2008241

ROBUST-BOX WIDTH 3.150", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2008241

ROBUST-BOX WIDTH 3.150", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x2.36″
IP 66
AltText

C2008242

ROBUST-BOX WIDTH 3.150", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2008242

ROBUST-BOX WIDTH 3.150", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x2.36″
IP 66
AltText

C2012121

ROBUST-BOX WIDTH 4.724", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2012121

ROBUST-BOX WIDTH 4.724", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x2.36″
IP 66
AltText

C2012122

ROBUST-BOX WIDTH 4.724", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2012122

ROBUST-BOX WIDTH 4.724", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x2.36″
IP 66
AltText

C2012201

ROBUST-BOX WIDTH 4.724", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2012201

ROBUST-BOX WIDTH 4.724", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x2.36″
IP 66
AltText

C2012202

ROBUST-BOX WIDTH 4.724", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2012202

ROBUST-BOX WIDTH 4.724", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x2.36″
IP 66
AltText

C2012241

ROBUST-BOX WIDTH 4.724", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2012241

ROBUST-BOX WIDTH 4.724", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x2.36″
IP 66
AltText

C2012242

ROBUST-BOX WIDTH 4.724", Vers, II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2012242

ROBUST-BOX WIDTH 4.724", Vers, II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x2.36″
IP 66
AltText

C2016161

ROBUST-BOX WIDTH 6.299", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2016161

ROBUST-BOX WIDTH 6.299", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x2.36″
IP 66
AltText

C2016162

ROBUST-BOX WIDTH 6.299", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2016162

ROBUST-BOX WIDTH 6.299", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x2.36″
IP 66
AltText

C2016241

ROBUST-BOX WIDTH 6.299", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2016241

ROBUST-BOX WIDTH 6.299", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x2.36″
IP 66
AltText

C2016242

ROBUST-BOX WIDTH 6.299", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2016242

ROBUST-BOX WIDTH 6.299", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x2.36″
IP 66
AltText

C2080801

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2080801

Case shell 3.150", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x1.57″
AltText

C2080802

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2080802

Case shell 3.150", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x1.57″
AltText

C2081201

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2081201

Case shell 3.150", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x1.57″
AltText

C2081202

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2081202

Case shell 3.150", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x1.57″
AltText

C2081601

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2081601

Case shell 3.150", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x1.57″
AltText

C2081602

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2081602

Case shell 3.150", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x1.57″
AltText

C2082401

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2082401

Case shell 3.150", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x1.57″
AltText

C2082402

Case shell 3.150", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2082402

Case shell 3.150", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x1.57″
AltText

C2108081

ROBUST-BOX WIDTH 3.150", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and botttom, assembly kit

Close

C2108081

ROBUST-BOX WIDTH 3.150", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x3.15″
IP 66
AltText

C2108082

ROBUST-BOX WIDTH 3.150", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2108082

ROBUST-BOX WIDTH 3.150", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
3.15″x3.15″x3.15″
IP 66
AltText

C2108121

ROBUST-BOX WIDTH 3.150", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2108121

ROBUST-BOX WIDTH 3.150", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x3.15″
IP 66
AltText

C2108122

ROBUST-BOX WIDTH 3.150", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2108122

ROBUST-BOX WIDTH 3.150", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x3.15″x3.15″
IP 66
AltText

C2108161

ROBUST-BOX WIDTH 3.150", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2108161

ROBUST-BOX WIDTH 3.150", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x3.15″
IP 66
AltText

C2108162

ROBUST-BOX WIDTH 3.150", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2108162

ROBUST-BOX WIDTH 3.150", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x3.15″x3.15″
IP 66
AltText

C2108241

ROBUST-BOX WIDTH 3.150", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2108241

ROBUST-BOX WIDTH 3.150", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x3.15″
IP 66
AltText

C2108242

ROBUST-BOX WIDTH 3.150", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2108242

ROBUST-BOX WIDTH 3.150", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x3.15″x3.15″
IP 66
AltText

C2112121

ROBUST-BOX WIDTH 4.724", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2112121

ROBUST-BOX WIDTH 4.724", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x3.54″
IP 66
AltText

C2112122

ROBUST-BOX WIDTH 4.724", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2112122

ROBUST-BOX WIDTH 4.724", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x3.54″
IP 66
AltText

C2112201

ROBUST-BOX WIDTH 4.724", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2112201

ROBUST-BOX WIDTH 4.724", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x3.54″
IP 66
AltText

C2112202

ROBUST-BOX WIDTH 4.724", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2112202

ROBUST-BOX WIDTH 4.724", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x3.54″
IP 66
AltText

C2112241

ROBUST-BOX WIDTH 4.724", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2112241

ROBUST-BOX WIDTH 4.724", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x3.54″
IP 66
AltText

C2112242

ROBUST-BOX WIDTH 4.724", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2112242

ROBUST-BOX WIDTH 4.724", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x3.54″
IP 66
AltText

C2116161

ROBUST-BOX WIDTH 6.299", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2116161

ROBUST-BOX WIDTH 6.299", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x3.54″
IP 66
AltText

C2116162

ROBUST-BOX WIDTH 6.299", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2116162

ROBUST-BOX WIDTH 6.299", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x3.54″
IP 66
AltText

C2116241

ROBUST-BOX WIDTH 6.299", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2116241

ROBUST-BOX WIDTH 6.299", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x3.54″
IP 66
AltText

C2116242

ROBUST-BOX WIDTH 6.299", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2116242

ROBUST-BOX WIDTH 6.299", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x3.54″
IP 66
AltText

C2120301

ROBUST-BOX WIDTH 7.874", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2120301

ROBUST-BOX WIDTH 7.874", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.81″x7.87″x3.15″
IP 66
AltText

C2121201

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2121201

Case shell 4.724", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x2.36″
AltText

C2121202

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2121202

Case shell 4.724", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
4.72″x4.72″x2.36″
AltText

C2122001

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2122001

Case shell 4.724", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x2.36″
AltText

C2122002

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2122002

Case shell 4.724", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
7.87″x4.72″x2.36″
AltText

C2122401

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2122401

Case shell 4.724", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x2.36″
AltText

C2122402

Case shell 4.724", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2122402

Case shell 4.724", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x4.72″x2.36″
AltText

C2124361

ROBUST-BOX WIDTH 9.449", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2124361

ROBUST-BOX WIDTH 9.449", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
14.17″x9.45″x3.15″
IP 66
AltText

C2161601

Case shell 6.299", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2161601

Case shell 6.299", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x2.36″
AltText

C2161602

Case shell 6.299", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2161602

Case shell 6.299", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
6.30″x6.30″x2.36″
AltText

C2162401

Case shell 6.299", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2162401

Case shell 6.299", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x2.36″
AltText

C2162402

Case shell 6.299", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C2162402

Case shell 6.299", with tongue
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x2.36″
AltText

C2203001

Case shell 7.874", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2203001

Case shell 7.874", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.81″x7.87″x1.57″
AltText

C2243601

Case shell 9.449", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C2243601

Case shell 9.449", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
14.17″x9.45″x1.57″
AltText

C2416241

ROBUST-BOX WIDTH 6.299", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2416241

ROBUST-BOX WIDTH 6.299", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x4.72″
IP 66
AltText

C2416242

ROBUST-BOX WIDTH 6.299", Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2416242

ROBUST-BOX WIDTH 6.299", Vers. II
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x4.72″
IP 66
AltText

C2420301

ROBUST-BOX WIDTH 7.874", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2420301

ROBUST-BOX WIDTH 7.874", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.81″x7.87″x4.72″
IP 66
AltText

C2424361

ROBUST-BOX WIDTH 9.449", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2424361

ROBUST-BOX WIDTH 9.449", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
14.17″x9.45″x4.72″
IP 66
AltText

C2520301

ROBUST-BOX WIDTH 7.874", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Lid fixing outside of sealed area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2520301

ROBUST-BOX WIDTH 7.874", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.81″x7.87″x6.30″
IP 66
AltText

C2524361

ROBUST-BOX WIDTH 9.449", Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Close

C2524361

ROBUST-BOX WIDTH 9.449", Vers. I
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
14.17″x9.45″x6.30″
IP 66
AltText

C3006061

SNAPTEC 2.362" x 2.362" Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-molded shafts within the base part.

Supply 1 top and base part with sealing, cover for the locking openings, dismantling key

Close

C3006061

SNAPTEC 2.362" x 2.362"
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
2.36″x2.36″x1.57″
IP 65
AltText

C3006101

SNAPTEC 2.362" x 3.937" Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-molded shafts within the base part.

Supply 1 top and base part with sealing, covers for the locking openings, dismantling key

Close

C3006101

SNAPTEC 2.362" x 3.937"
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
2.36″x3.94″x1.57″
IP 65
AltText

C3010101

SNAPTEC 3.937" x 3.937" Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-molded shafts within the base part.

Supply 1 top and base part with sealing, covers for the locking openings, dismantling key

Close

C3010101

SNAPTEC 3.937" x 3.937"
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
3.94″x3.94″x3.15″
IP 65
AltText

C3162401

Case shell 6.299", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C3162401

Case shell 6.299", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x2.36″
AltText

C3162402

Case shell 6.299", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C3162402

Case shell 6.299", with groove
product added to your basket
PC (UL 94 HB)
light gray RAL 7035
9.45″x6.30″x2.36″
AltText

C4203001

Case shell 7.874", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C4203001

Case shell 7.874", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.81″x7.87″x3.15″
AltText

C4243601

Case shell 9.449", with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Close

C4243601

Case shell 9.449", with tongue
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
14.17″x9.45″x3.15″
AltText

C5203001

Case shell 7.874", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C5203001

Case shell 7.874", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.81″x7.87″x3.15″
AltText

C5243601

Case shell 9.449", with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.031" for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Close

C5243601

Case shell 9.449", with groove
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
14.17″x9.45″x3.15″
AltText

C6009121

SMART-BOX WIDTH 3.543" Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Close

C6009121

SMART-BOX WIDTH 3.543"
product added to your basket
ASA+PC (UL 94 V-0)
light gray RAL 7035
4.72″x3.54″x1.97″
IP 66
AltText

C6009161

SMART-BOX WIDTH 3.543" Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Close

C6009161

SMART-BOX WIDTH 3.543"
product added to your basket
ASA+PC (UL 94 V-0)
light gray RAL 7035
6.30″x3.54″x1.97″
IP 66
AltText

C6011141

SMART-BOX WIDTH 4.331" Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Close

C6011141

SMART-BOX WIDTH 4.331"
product added to your basket
ASA+PC (UL 94 V-0)
light gray RAL 7035
5.51″x4.33″x2.36″
IP 66
AltText

C6011201

SMART-BOX WIDTH 4.331" Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Close

C6011201

SMART-BOX WIDTH 4.331"
product added to your basket
ASA+PC (UL 94 V-0)
light gray RAL 7035
7.87″x4.33″x2.36″
IP 66
AltText

C6013161

SMART-BOX WIDTH 5.118" Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Close

C6013161

SMART-BOX WIDTH 5.118"
product added to your basket
ASA+PC (UL 94 V-0)
light gray RAL 7035
6.30″x5.12″x2.36″
IP 66
AltText

C6013221

SMART-BOX WIDTH 5.118" Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Close

C6013221

SMART-BOX WIDTH 5.118"
product added to your basket
ASA+PC (UL 94 V-0)
light gray RAL 7035
8.66″x5.12″x2.36″
IP 66
AltText

C6015181

SMART-BOX WIDTH 5.906" Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims (hinged), assembly kit incl. cover retention

Close

C6015181

SMART-BOX WIDTH 5.906"
product added to your basket
ASA+PC (UL 94 V-0)
light gray RAL 7035
7.09″x5.91″x2.36″
IP 66
AltText

C6017281

SMART-BOX WIDTH 6.693" Four-part enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.

Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention

Close

C6017281

SMART-BOX WIDTH 6.693"
product added to your basket
ASA+PC (UL 94 V-0)
light gray RAL 7035
11.02″x6.69″x2.36″
IP 65
AltText

C7008011

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7008011

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
3.31″x3.23″x2.17″
IP 66, IP 67, IK 07
AltText

C7008012

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7008012

IN-BOX
product added to your basket
PC
light gray RAL 7035
3.31″x3.23″x2.17″
IP 66, IP 67, IK 08
AltText

C7008014

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7008014

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
3.31″x3.23″x2.17″
IP 66, IP 67, IK 07
AltText

C7008015

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7008015

IN-BOX
product added to your basket
PC
light gray RAL 7035
3.31″x3.23″x2.17″
IP 66, IP 67, IK 08
AltText

C7008021

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7008021

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
3.31″x3.23″x3.35″
IP 66, IP 67, IK 07
AltText

C7008024

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7008024

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
3.31″x3.23″x3.35″
IP 66, IP 67, IK 07
AltText

C7008025

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7008025

IN-BOX
product added to your basket
PC
light gray RAL 7035
3.31″x3.23″x3.35″
IP 66, IP 67, IK 08
AltText

C7012011

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7012011

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.80″x3.23″x2.17″
IP 66, IP 67, IK 07
AltText

C7012012

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7012012

IN-BOX
product added to your basket
PC
light gray RAL 7035
4.80″x3.23″x2.17″
IP 66, IP 67, IK 08
AltText

C7012014

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7012014

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
4.80″x3.23″x2.17″
IP 66, IP 67, IK 07
AltText

C7012015

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7012015

IN-BOX
product added to your basket
PC
light gray RAL 7035
4.80″x3.23″x2.17″
IP 66, IP 67, IK 08
AltText

C7012021

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7012021

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.80″x3.23″x3.35″
IP 66, IP 67, IK 07
AltText

C7012024

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7012024

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
4.80″x3.23″x3.35″
IP 66, IP 67, IK 07
AltText

C7012025

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7012025

IN-BOX
product added to your basket
PC
light gray RAL 7035
4.80″x3.23″x3.35″
IP 66, IP 67, IK 08
AltText

C7013031

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7013031

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.88″x4.80″x2.17″
IP 66, IP 67, IK 07
AltText

C7013032

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7013032

IN-BOX
product added to your basket
PC
light gray RAL 7035
4.88″x4.80″x2.17″
IP 66, IP 67, IK 08
AltText

C7013034

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7013034

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
4.88″x4.80″x2.17″
IP 66, IP 67, IK 07
AltText

C7013035

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7013035

IN-BOX
product added to your basket
PC
light gray RAL 7035
4.88″x4.80″x2.17″
IP 66, IP 67, IK 08
AltText

C7013051

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7013051

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
4.88″x4.80″x3.35″
IP 66, IP 67, IK 07
AltText

C7013054

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7013054

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
4.88″x4.80″x3.35″
IP 66, IP 67, IK 07
AltText

C7013055

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7013055

IN-BOX
product added to your basket
PC
light gray RAL 7035
4.88″x4.80″x3.35″
IP 66, IP 67, IK 08
AltText

C7016011

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016011

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.38″x3.23″x2.17″
IP 66, IP 67, IK 07
AltText

C7016012

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016012

IN-BOX
product added to your basket
PC
light gray RAL 7035
6.38″x3.23″x2.17″
IP 66, IP 67, IK 08
AltText

C7016014

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016014

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
6.38″x3.23″x2.17″
IP 66, IP 67, IK 07
AltText

C7016015

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016015

IN-BOX
product added to your basket
PC
light gray RAL 7035
6.38″x3.23″x2.17″
IP 66, IP 67, IK 08
AltText

C7016021

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016021

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.38″x3.23″x3.35″
IP 66, IP 67, IK 07
AltText

C7016024

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016024

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
6.38″x3.23″x3.35″
IP 66, IP 67, IK 07
AltText

C7016025

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016025

IN-BOX
product added to your basket
PC
light gray RAL 7035
6.38″x3.23″x3.35″
IP 66, IP 67, IK 08
AltText

C7016061

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016061

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
6.38″x4.80″x3.54″
IP 66, IP 67, IK 07
AltText

C7016062

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016062

IN-BOX
product added to your basket
PC
light gray RAL 7035
6.38″x4.80″x3.54″
IP 66, IP 67, IK 08
AltText

C7016064

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016064

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
6.38″x4.80″x3.54″
IP 66, IP 67, IK 07
AltText

C7016065

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7016065

IN-BOX
product added to your basket
PC
light gray RAL 7035
6.38″x4.80″x3.54″
IP 66, IP 67, IK 08
AltText

C7020041

IN-BOX

Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7020041

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
7.95″x4.80″x2.95″
IP 66, IP 67, IK 07
AltText

C7020042

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7020042

IN-BOX
product added to your basket
PC
light gray RAL 7035
7.95″x4.80″x2.95″
IP 66, IP 67, IK 08
AltText

C7020044

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7020044

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
transparent
7.95″x4.80″x2.95″
IP 66, IP 67, IK 07
AltText

C7020045

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7020045

IN-BOX
product added to your basket
PC
transparent
7.95″x4.80″x2.95″
IP 66, IP 67, IK 08
AltText

C7020061

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7020061

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
7.95″x4.80″x3.54″
IP 66, IP 67, IK 07
AltText

C7020064

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7020064

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
7.95″x4.80″x3.54″
IP 66, IP 67, IK 07
AltText

C7020065

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7020065

IN-BOX
product added to your basket
PC
light gray RAL 7035
7.95″x4.80″x3.54″
IP 66, IP 67, IK 08
AltText

C7021071

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7021071

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
7.95″x5.98″x3.54″
IP 66, IP 67, IK 07
AltText

C7021072

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7021072

IN-BOX
product added to your basket
PC
light gray RAL 7035
7.95″x5.98″x3.54″
IP 66, IP 67, IK 08
AltText

C7021074

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7021074

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
7.95″x5.98″x3.54″
IP 66, IP 67, IK 07
AltText

C7021075

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7021075

IN-BOX
product added to your basket
PC
light gray RAL 7035
7.95″x5.98″x3.54″
IP 66, IP 67, IK 08
AltText

C7025081

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7025081

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.92″x6.38″x3.54″
IP 66, IP 67, IK 07
AltText

C7025082

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7025082

IN-BOX
product added to your basket
PC
light gray RAL 7035
9.92″x6.38″x3.54″
IP 66, IP 67, IK 08
AltText

C7025084

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7025084

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
9.92″x6.38″x3.54″
IP 66, IP 67, IK 07
AltText

C7025085

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7025085

IN-BOX
product added to your basket
PC
light gray RAL 7035
9.92″x6.38″x3.54″
IP 66, IP 67, IK 08
AltText

C7025091

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7025091

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
9.92″x6.38″x4.72″
IP 66, IP 67, IK 07
AltText

C7025094

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7025094

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
9.92″x6.38″x4.72″
IP 66, IP 67, IK 07
AltText

C7025095

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7025095

IN-BOX
product added to your basket
PC
light gray RAL 7035
9.92″x6.38″x4.72″
IP 66, IP 67, IK 08
AltText

C7030101

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7030101

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.89″x9.13″x3.54″
IP 66, IP 67, IK 07
AltText

C7030102

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7030102

IN-BOX
product added to your basket
PC
light gray RAL 7035
11.89″x9.13″x3.54″
IP 66, IP 67, IK 08
AltText

C7030104

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7030104

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
11.89″x9.13″x3.54″
IP 66, IP 67, IK 07
AltText

C7030105

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7030105

IN-BOX
product added to your basket
PC
light gray RAL 7035
11.89″x9.13″x3.54″
IP 66, IP 67, IK 08
AltText

C7030111

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7030111

IN-BOX
product added to your basket
ABS (UL 94 HB)
light gray RAL 7035
11.89″x9.13″x4.33″
IP 66, IP 67, IK 07
AltText

C7030112

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7030112

IN-BOX
product added to your basket
PC
light gray RAL 7035
11.89″x9.13″x4.33″
IP 66, IP 67, IK 08
AltText

C7030114

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7030114

IN-BOX
product added to your basket
ABS/PC (UL 94 HB)
light gray RAL 7035
11.89″x9.13″x4.33″
IP 66, IP 67, IK 07
AltText

C7030115

IN-BOX Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.

Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration

Close

C7030115

IN-BOX
product added to your basket
PC
light gray RAL 7035
11.89″x9.13″x4.33″
IP 66, IP 67, IK 08
  • Technical Data
  • Purchasing Data
Protection class
Color
light gray RAL 7035
The degree(s) of protection listed refer to the empty standard enclosures (without any modifications) and are in compliance with the EN 60529 standard.
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
4 g
Customs tariff number
(OKW product)
39269097
Country of manufacture
Germany