Search Your location/language U.S.A., English
A9167327 Holder L, with adapter

A9167327

Holder L, with adapter

Special holder with adapter for SMART-CASE L for fixing at 4-claws-system-holders (separate articles A9220029, A9220039, A9220049, A9220059). Holder screw-fixed with adapter.

Supply

1 holder, 1 adapter, assembly kit

  • Components/Accessories
  • View Customizing Options

System components to complete

A9067107 SMART-CASE L, Vers. I

A9067107

SMART-CASE L, Vers. I Large, ergonomic handheld enclosure. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version With battery compartment for two 1.5 V mignon cells (AA)or a 9 V flat battery

Supply Case-top and base, battery compartment lid, assembly kit

Close

A9067107

SMART-CASE L, Vers. I ABS (UL 94 HB)
off-white RAL 9002
5.51″x2.47″x1.20″
IP 40
A9067117 SMART-CASE L, Vers. II

A9067117

SMART-CASE L, Vers. II Two-part handheld case with screw connection without battery compartment. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version Without battery compartment

Supply Case-top and base, assembly kit

Close

A9067117

SMART-CASE L, Vers. II ABS (UL 94 HB)
off-white RAL 9002
5.51″x2.47″x1.20″
IP 65 opt., IP 40
A9067127 SMART-CASE L, Vers. III

A9067127

SMART-CASE L, Vers. III Three-part handheld case with cable bush. Bush simply to plug-in, suitable for round cables. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version Without battery compartment, bottom part with cable strain (0.197" - 0.232")

Supply Case-top and base, cable strain, assembly kit

Close

A9067127

SMART-CASE L, Vers. III ABS (UL 94 HB)
off-white RAL 9002
5.51″x2.47″x1.20″
IP 65 opt., IP 40
A9067137 SMART-CASE L, Vers. IV

A9067137

SMART-CASE L, Vers. IV Three-part handheld case with cable bush. Bush simply to plug-in, suitable for round cables. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version Without battery compartment, bottom part with cable strain (0.165" - 0.197")

Supply Case-top and base, cable strain, assembly kit

Close

A9067137

SMART-CASE L, Vers. IV ABS (UL 94 HB)
off-white RAL 9002
5.51″x2.47″x1.20″
IP 65 opt., IP 40
A9067147 SMART-CASE L, Vers. V

A9067147

SMART-CASE L, Vers. V Three-part handheld case with cable bush. Bush simply to plug-in, suitable for round cables. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version Without battery compartment, bottom part with cable strain (0.134" - 0.165")

Supply Case-top and base, cable strain, assembly kit

Close

A9067147

SMART-CASE L, Vers. V ABS (UL 94 HB)
off-white RAL 9002
5.51″x2.47″x1.20″
IP 65 opt., IP 40

Accessory to complete

A9220029 Holding device, ball joint

A9220029

Holding device, ball joint For self-adhesive mounting or screw mounting. The base can be moved horizontally backwards and forwards by 45° and can be rotated around its own axis. The optimum setting can be fixed with the integrated locking screw. Adapter for holding device (4-claws system) required as a separate article for securing the device.

Supply 1 holding device, mounting material

Close

A9220029

Holding device, ball joint ABS (UL 94 HB)
black
1.18″x2.13″x2.95″
A9220039 Holding device, bicycle

A9220039

Holding device, bicycle For screw mounting on the bar with ø 0.787" to 0.984". With two rubber shims for correct mounting on the bar or handlebars. Adapter for holding device (4-claws system) required as a separate article for securing the device.

Supply 1 holding device, 2 rubber shims, 1 allen key

Close

A9220039

Holding device, bicycle PC
black
1.50″x2.24″x1.65″
A9220049 Holding device, flexible swan neck with suction pad

A9220049

Holding device, flexible swan neck with suction pad The device can be rotated by 360° and can be adjusted horizontally and vertically with an inclination angle of 40° in the viewing angle. With especially sturdy 0.315" aluminum wire – guarantees significantly reduced vibration characteriztics and allows higher weight-carrying capacity. The diameter of the suction disk is 2.756". Adapter for holding device (4-claws system) required as a separate article for securing the device.

Supply 1 holding device

Close

A9220049

Holding device, flexible swan neck with suction pad black
7.48″x2.76″x2.76″
A9220059 Holding device, secured with suction pad

A9220059

Holding device, secured with suction pad Grid plate with rear-mounted grid arm and integrated suction disk with 2.756" diameter. Secure mounting on all smooth surfaces. Integrated spring mechanism and novel vacuum return path guarantee that the suction disk is absolutely flat before mounting. The position can be fixed using locking screws. Adapter for holding device (4-claws system) required as a separate article for securing the device.

Supply 1 holding device

Close

A9220059

Holding device, secured with suction pad black
5.24″x2.76″x2.76″

Customizing options for A9167327

What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.

  • Technical Data
  • Purchasing Data
Color
off-white RAL 9002
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
36 g
Customs tariff number
(OKW product)
39269097
Country of manufacture
Germany
trafficflow