Search Your location/language U.S.A., English
A9199005 Strain relief

A9199005

Strain relief

Frame for securing the cable on existing supports. Suitable for cable ø approx. 0.197"-0.276".

Supply

1 strain relief device, 2 screws

  • To be used for
A9076107 DATEC-CONTROL XS, Vers. I

A9076107

DATEC-CONTROL XS, Vers. I Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down (battery compartment as accessory).

Version With closed operating area, recess: 1.6 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076107

DATEC-CONTROL XS, Vers. I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″x1.56″
IP 65 opt.
A9076109 DATEC-CONTROL XS, Vers. I

A9076109

DATEC-CONTROL XS, Vers. I Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.6 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076109

DATEC-CONTROL XS, Vers. I
product added to your list
ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″x1.56″
IP 65 opt.
A9076207 DATEC-CONTROL XS, Vers. II

A9076207

DATEC-CONTROL XS, Vers. II Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076207

DATEC-CONTROL XS, Vers. II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″x1.56″
IP 65 opt.
A9076209 DATEC-CONTROL XS, Vers. II

A9076209

DATEC-CONTROL XS, Vers. II Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down.(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9076209

DATEC-CONTROL XS, Vers. II
product added to your list
ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″x1.57″
IP 65 opt.
A9077107 DATEC-CONTROL S, Vers. I

A9077107

DATEC-CONTROL S, Vers. I Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.7 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9077107

DATEC-CONTROL S, Vers. I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″x1.85″
IP 65 opt.
A9077109 DATEC-CONTROL S, Vers. I

A9077109

DATEC-CONTROL S, Vers. I Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.7 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Close

A9077109

DATEC-CONTROL S, Vers. I
product added to your list
ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″x1.85″
IP 65 opt.
A9077207 DATEC-CONTROL S, Vers. II

A9077207

DATEC-CONTROL S, Vers. II Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9077207

DATEC-CONTROL S, Vers. II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″x1.85″
IP 65 opt.
A9077209 DATEC-CONTROL S, Vers. II

A9077209

DATEC-CONTROL S, Vers. II Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Close

A9077209

DATEC-CONTROL S, Vers. II
product added to your list
ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″x1.85″
IP 65 opt.
A9176137 Station XS

A9176137

Station XS Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.

Version Desktop version

Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads

Close

A9176137

Station XS
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
A9176139 Station XS

A9176139

Station XS Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.

Version Desktop version

Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads

Close

A9176139

Station XS
product added to your list
ABS (UL 94 HB)
black RAL 9005
A9177137 Station S

A9177137

Station S Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.

Version Desktop version

Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads

Close

A9177137

Station S
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
A9177139 Station S

A9177139

Station S Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.

Version Desktop version

Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads

Close

A9177139

Station S
product added to your list
ABS (UL 94 HB)
black RAL 9005
A9912637 LUX CASE 150, Vers. I

A9912637

LUX CASE 150, Vers. I Three-piece case with secure snap-in mechanism. Additional screwing (assembly kit as accessory) possible if required. Fixing towers or card guide (accessory) for PCB assembly.

Version Without battery compartment, socket for cable strain relief

Supply 1 top, center section, base and assembly kit

Close

A9912637

LUX CASE 150, Vers. I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
4.65″x5.91″x2.24″
A9915737 LUX CASE 190, Vers. I

A9915737

LUX CASE 190, Vers. I Three-piece case with secure snap-in mechanism. Additional screwing (assembly kit as accessory) possible if required. Fixing towers or card guide (accessory) for PCB assembly.

Version Without battery compartment, socket for cable strain relief

Supply 1 top, center section, base and assembly kit

Close

A9915737

LUX CASE 190, Vers. I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
5.83″x7.48″x2.64″
A9917837 LUX CASE 230, Vers. I

A9917837

LUX CASE 230, Vers. I Three-piece case with secure snap-in mechanism. Additional screwing (assembly kit as accessory) possible if required. Fixing towers or card guide (accessory) for PCB assembly.

Version Without ventilation slots, with pillars for strain relief

Supply 1 top, center section, base and assembly kit

Close

A9917837

LUX CASE 230, Vers. I
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
6.81″x9.06″x5.35″
A9917847 LUX CASE 230, Vers. II

A9917847

LUX CASE 230, Vers. II Three-piece case with secure snap-in mechanism. Additional screwing (assembly kit as accessory) possible if required. Fixing towers or card guide (accessory) for PCB assembly.

Version With ventilation slots, with pillars for strain relief

Supply 1 top, center section, base and assembly kit

Close

A9917847

LUX CASE 230, Vers. II
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
6.81″x9.06″x5.35″
A9917857 LUX CASE 230, Vers. III

A9917857

LUX CASE 230, Vers. III Three-piece case with handle. Push button mechanism with 30° indexing. Additional screwing (assembly kit as accessory) possible if required. Fixing towers or card guide (accessory) for PCB assembly.

Version Without ventilation slots and with handle, with pillars for strain relief

Supply 1 top, center section, base, handle and assembly kit

Close

A9917857

LUX CASE 230, Vers. III
product added to your list
ABS (UL 94 HB)
off white/pebble gray RAL 9002/7032
6.81″x9.06″x5.35″
A9917877 LUX CASE 230, Vers. IV

A9917877

LUX CASE 230, Vers. IV Three-piece case with handle. Push button mechanism with 30° indexing. Additional screwing (assembly kit as accessory) possible if required. Fixing towers or card guide (accessory) for PCB assembly.

Version With ventilation slots and handle, with pillars for strain relief

Supply 1 top, center section, base, handle and assembly kit

Close

A9917877

LUX CASE 230, Vers. IV
product added to your list
ABS (UL 94 HB)
off white/pebble gray RAL 9002/7032
6.81″x9.06″x5.35″
B2804027 STYLE-CASE L

B2804027

STYLE-CASE L Two-piece hand-held enclosure with an ergonomic, robust design and a pleasant touch sensation. Offers protection up to IP 65 with sealing (accessory). Protection class IP 40 without sealing. Attachment pillars for PCBs and components in the top and bottom parts.

Supply Top and bottom part, assembly kit

Close

B2804027

STYLE-CASE L
product added to your list
ASA (UL 94 HB)
traffic white RAL 9016
6.54″x2.52″x1.22″
IP 65 opt., IP 40
B5010007 Bottom and top part R110 F

B5010007

Bottom and top part R110 F Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.

Version Bottom part "level"

Supply 1 top and bottom part R110 F, assembly kit

Close

B5010007

Bottom and top part R110 F
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
⌀4.33″x1.18″
B5010009 Bottom and top part R110F

B5010009

Bottom and top part R110F Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.

Version Bottom part "level"

Supply 1 top and bottom part R110 F, assembly kit

Close

B5010009

Bottom and top part R110F
product added to your list
ABS (UL 94 HB)
black RAL 9005
⌀4.33″x1.18″
B5010107 Bottom and top part R110 H

B5010107

Bottom and top part R110 H Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.

Version Bottom part "level"

Supply 1 top and bottom part R110 H, assembly kit

Close

B5010107

Bottom and top part R110 H
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
⌀4.33″x1.50″
B5010109 Bottom and top part R110 H

B5010109

Bottom and top part R110 H Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.

Version Bottom part "level"

Supply 1 top and bottom part R110 H, assembly kit

Close

B5010109

Bottom and top part R110 H
product added to your list
ABS (UL 94 HB)
black RAL 9005
⌀4.33″x1.50″
B5010207 Bottom and top part R110 F

B5010207

Bottom and top part R110 F Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part R110 F, assembly kit

Close

B5010207

Bottom and top part R110 F
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
⌀4.33″x1.50″
B5010209 Bottom and top part R110 F

B5010209

Bottom and top part R110 F Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part R110 F, assembly kit

Close

B5010209

Bottom and top part R110 F
product added to your list
ABS (UL 94 HB)
black RAL 9005
⌀4.33″x1.50″
B5010307 Bottom and top part R110 H

B5010307

Bottom and top part R110 H Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part R110 H, assembly kit

Close

B5010307

Bottom and top part R110 H
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
⌀4.33″x1.61″
B5010309 Bottom and top part R110 H

B5010309

Bottom and top part R110 H Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part R110 H, assembly kit

Close

B5010309

Bottom and top part R110 H
product added to your list
ABS (UL 94 HB)
black RAL 9005
⌀4.33″x1.61″
B5011117 Base

B5011117

Base Assembly unit: suitable for all bottom parts. Spacer for ceiling / wall mounting. Easy to mount with bayonet lock. If required it can be additionally secured using the anti-rotation device (acc.). Locators for 2 x AA and strain relief (acc.) in the base.

Supply 1 base

Close

B5011117

Base
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
B5011119 Base

B5011119

Base Assembly unit: suitable for all bottom parts. Spacer for ceiling / wall mounting. Easy to mount with bayonet lock. If required it can be additionally secured using the anti-rotation device (acc.). Locators for 2 x AA and strain relief (acc.) in the base.

Supply 1 base

Close

B5011119

Base
product added to your list
ABS (UL 94 HB)
black RAL 9005
B5012207 Bottom and top part S110F

B5012207

Bottom and top part S110F Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30°or base 55°) required for bottom part - see separate article.

Version Bottom part "inclinded"

Supply 1 top and bottom part S110 F, assembly kit

Close

B5012207

Bottom and top part S110F
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
4.33″x4.33″x1.50″
B5012209 Bottom and top part S110F

B5012209

Bottom and top part S110F Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30°or base 55°) required for bottom part - see separate article.

Version Bottom part "inclinded"

Supply 1 top and bottom part S110 F, assembly kit

Close

B5012209

Bottom and top part S110F
product added to your list
ABS (UL 94 HB)
black RAL 9005
4.33″x4.33″x1.50″
B5015007 Bottom and top part O160 F

B5015007

Bottom and top part O160 F Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.

Version Bottom part "level"

Supply 1 top and bottom part O160 F, assembly kit

Close

B5015007

Bottom and top part O160 F
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
6.30″x4.33″x1.18″
B5015009 Bottom and top part O160 F

B5015009

Bottom and top part O160 F Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.

Version Bottom part "level"

Supply 1 top and bottom part O160 F, assembly kit

Close

B5015009

Bottom and top part O160 F
product added to your list
ABS (UL 94 HB)
black RAL 9005
6.30″x4.33″x1.18″
B5015107 Bottom and top part O160 H

B5015107

Bottom and top part O160 H Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.

Version Bottom part "level"

Supply 1 top and bottom part O160 H, assembly kit

Close

B5015107

Bottom and top part O160 H
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
6.30″x4.33″x1.50″
B5015109 Bottom and top part O160 H

B5015109

Bottom and top part O160 H Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base) required for bottom part - see separate article.

Version Bottom part "level"

Supply 1 top and bottom part O160 H, assembly kit

Close

B5015109

Bottom and top part O160 H
product added to your list
ABS (UL 94 HB)
black RAL 9005
6.30″x4.33″x1.50″
B5015207 Bottom and top part O160 F

B5015207

Bottom and top part O160 F Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part O160 F, assembly kit

Close

B5015207

Bottom and top part O160 F
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
6.30″x4.33″x1.50″
B5015209 Bottom and top part O160 F

B5015209

Bottom and top part O160 F Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part O160 F, assembly kit

Close

B5015209

Bottom and top part O160 F
product added to your list
ABS (UL 94 HB)
black RAL 9005
6.30″x4.33″x1.50″
B5015307 Bottom and top part O160 H

B5015307

Bottom and top part O160 H Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part O160 H, assembly kit

Close

B5015307

Bottom and top part O160 H
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
6.30″x4.33″x1.61″
B5015309 Bottom and top part O160 H

B5015309

Bottom and top part O160 H Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part O160 H, assembly kit

Close

B5015309

Bottom and top part O160 H
product added to your list
ABS (UL 94 HB)
black RAL 9005
6.30″x4.33″x1.61″
B5017207 Bottom and top part E160 F

B5017207

Bottom and top part E160 F Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part E160 F, assembly kit

Close

B5017207

Bottom and top part E160 F
product added to your list
ABS (UL 94 HB)
off-white RAL 9002
6.30″x4.33″x1.50″
B5017209 Bottom and top part E160 F

B5017209

Bottom and top part E160 F Assembly unit: Screw pillars for PCBs in top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base / base 30° or base 55°) required for bottom part - see separate article.

Version Bottom part "inclined"

Supply 1 top and bottom part E160 F, assembly kit

Close

B5017209

Bottom and top part E160 F
product added to your list
ABS (UL 94 HB)
black RAL 9005
6.30″x4.33″x1.50″
  • Technical Data
  • Purchasing Data
Material
Color
volcano
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
2 g
Customs tariff number
(OKW product)
73181558
Country of manufacture
Germany
trafficflow