• Advanced Search
(800) 965-9872
You are here: | | | |
A9160003 Plug-in contact, 1 x 9 V

A9160003

Plug-in contact, 1 x 9 V

Version: Lateral cable exit. Cable length approx. 3.937". Diameter of contacts = 0.224"/0.209".
Application: for a 9 V flat battery.

Supply

1 plug-in contact


  • Technical Data
  • Drawings /
    Further Information
  • Purchasing Data
Please take the dimensions from current parts. These are subject to material-specific manufacturing tolerances.
  • To be used for
NEW PRODUCT
View

A0615017  Add to my list
COMTEC 150 F, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.03″
IP 40

A0615019  Add to my list
COMTEC 150 F, Vers. II

ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.03″
IP 40

A0615117  Add to my list
COMTEC 150 H, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.81″
IP 40

A0615119  Add to my list
COMTEC 150 H, Vers. II

ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.81″
IP 40

A0620017  Add to my list
COMTEC 200 F, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
7.87″x5.91″x1.69″
IP 40

A0620019  Add to my list
COMTEC 200 F, Vers. II

ABS (UL 94 HB)
black RAL 9005
7.87″x5.91″x1.69″
IP 40

A0620117  Add to my list
COMTEC 200 H, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
7.87″x5.91″x2.47″
IP 40

A0620119  Add to my list
COMTEC 200 H, Vers. II

ABS (UL 94 HB)
black RAL 9005
7.87″x5.91″x2.47″
IP 40

A9046107  Add to my list
HAND-TERMINAL M, Vers. I

PC+ABS (UL 94 V-0)
off-white RAL 9002
8.66″x4.72″x2.56″
IP 65 opt.

A9046109  Add to my list
HAND-TERMINAL M, Vers. I

PC+ABS (UL 94 V-0)
black RAL 9005
8.66″x4.72″x2.56″
IP 65 opt.

A9046207  Add to my list
HAND-TERMINAL M, Vers. II

PC+ABS (UL 94 V-0)
off-white RAL 9002
8.66″x4.72″x2.56″
IP 65 opt.

A9046209  Add to my list
HAND-TERMINAL M, Vers. II

PC+ABS (UL 94 V-0)
black RAL 9005
8.66″x4.72″x2.56″
IP 65 opt.

A9060007  Add to my list
HAND-HELD-BOX P, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
5.71″x3.15″x1.44″

A9060009  Add to my list
HAND-HELD-BOX P, Vers. I

ABS (UL 94 HB)
black RAL 9005
5.71″x3.15″x1.44″

A9060017  Add to my list
HAND-HELD-BOX P, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
5.71″x3.15″x1.44″

A9060019  Add to my list
HAND-HELD-BOX P, Vers. II

ABS (UL 94 HB)
black RAL 9005
5.71″x3.15″x1.44″

A9061017  Add to my list
HAND-HELD-BOX N, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
7.09″x3.94″x1.73″

A9061019  Add to my list
HAND-HELD-BOX N, Vers. I

ABS (UL 94 HB)
black RAL 9005
7.09″x3.94″x1.73″

A9062017  Add to my list
HAND-HELD-BOX M, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
5.71″x3.15″x1.52″

A9062019  Add to my list
HAND-HELD-BOX M, Vers. I

ABS (UL 94 HB)
black RAL 9005
5.71″x3.15″x1.52″

A9067107  Add to my list
SMART-CASE L, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
5.51″x2.47″x1.20″
IP 40

A9067109  Add to my list
SMART-CASE L, Vers. I

ABS (UL 94 HB)
black RAL 9005
5.51″x2.47″x1.20″
IP 40

A9067209  Add to my list
SMART-CASE L, Vers. I

PMMA (IR) (UL 94 HB)
black RAL 9005
5.51″x2.47″x1.20″
IP 40

A9068107  Add to my list
SMART-CASE XL, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
6.61″x2.93″x1.39″
IP 40

A9068109  Add to my list
SMART-CASE XL, Vers. I

ABS (UL 94 HB)
black RAL 9005
6.61″x2.93″x1.39″
IP 40

A9068209  Add to my list
SMART-CASE XL, Vers. I

PMMA (IR) (UL 94 HB)
black RAL 9005
6.61″x2.93″x1.39″
IP 40

A9072107  Add to my list
DATEC-POCKET-BOX L

ABS (UL 94 HB)
off-white RAL 9002
4.72″x2.56″x0.87″
IP 41

A9072109  Add to my list
DATEC-POCKET-BOX L

ABS (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 41

A9072117  Add to my list
DATEC-POCKET-BOX L

ABS (UL 94 HB)
off-white RAL 9002
4.72″x2.56″x0.87″
IP 54

A9072119  Add to my list
DATEC-POCKET-BOX L

ABS (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 54

A9072127  Add to my list
DATEC-POCKET-BOX L

ABS (UL 94 HB)
off-white RAL 9002
4.72″x2.56″x0.87″
IP 41

A9072129  Add to my list
DATEC-POCKET-BOX L

ABS (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 41

A9072209  Add to my list
DATEC-POCKET-BOX L

PMMA (IR) (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 41

A9072219  Add to my list
DATEC-POCKET-BOX L

ABS (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 54

A9072229  Add to my list
DATEC-POCKET-BOX L

PMMA (IR) (UL 94 HB)
black RAL 9005
4.72″x2.56″x0.87″
IP 41

A9073107  Add to my list
DATEC-MOBIL-BOX S, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
5.98″x3.27″x1.32″
IP 65 opt.

A9073109  Add to my list
DATEC-MOBIL-BOX S, Vers. I

ABS (UL 94 HB)
black RAL 9005
5.98″x3.27″x1.32″
IP 65 opt.

A9073207  Add to my list
DATEC-MOBIL-BOX S, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
5.98″x3.27″x1.32″
IP 65 opt.

A9073209  Add to my list
DATEC-MOBIL-BOX S, Vers. II

ABS (UL 94 HB)
black RAL 9005
5.98″x3.27″x1.32″
IP 65 opt.

A9073307  Add to my list
DATEC-MOBIL-BOX S, Vers. III

ABS (UL 94 HB)
off-white RAL 9002
5.98″x3.27″x1.32″
IP 65 opt.

A9073309  Add to my list
DATEC-MOBIL-BOX S, Vers. III

ABS (UL 94 HB)
black RAL 9005
5.98″x3.27″x1.32″
IP 65 opt.

A9073407  Add to my list
DATEC-MOBIL-BOX S, Vers. IV

ABS (UL 94 HB)
off-white RAL 9002
5.98″x3.27″x1.32″
IP 65 opt.

A9073409  Add to my list
DATEC-MOBIL-BOX S, Vers. IV

ABS (UL 94 HB)
black RAL 9005
5.98″x3.27″x1.32″
IP 65 opt.

A9074107  Add to my list
DATEC-MOBIL-BOX M, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x1.73″
IP 65 opt.

A9074109  Add to my list
DATEC-MOBIL-BOX M, Vers. I

ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x1.73″
IP 65 opt.

A9074127  Add to my list
DATEC-MOBIL-BOX M, Vers. I, high

ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x2.32″
IP 65 opt.

A9074129  Add to my list
DATEC-MOBIL-BOX M, Vers. I, high

ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x2.32″
IP 65 opt.

A9074207  Add to my list
DATEC-MOBIL-BOX M, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x1.73″
IP 65 opt.

A9074209  Add to my list
DATEC-MOBIL-BOX M, Vers. II

ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x1.73″
IP 65 opt.

A9074227  Add to my list
DATEC-MOBIL-BOX M, Vers. II, high

ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x2.32″
IP 65 opt.

A9074229  Add to my list
DATEC-MOBIL-BOX M, Vers. II, high

ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x2.32″
IP 65 opt.

A9074307  Add to my list
DATEC-MOBIL-BOX M, Vers. III

ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x1.73″
IP 65 opt.

A9074309  Add to my list
DATEC-MOBIL-BOX M, Vers. III

ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x1.73″
IP 65 opt.

A9074407  Add to my list
DATEC-MOBIL-BOX M, Vers. IV

ABS (UL 94 HB)
off-white RAL 9002
7.68″x3.98″x1.73″
IP 65 opt.

A9074409  Add to my list
DATEC-MOBIL-BOX M, Vers. IV

ABS (UL 94 HB)
black RAL 9005
7.68″x3.98″x1.73″
IP 65 opt.

A9075107  Add to my list
DATEC-MOBIL-BOX L, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
9.92″x4.76″x1.97″
IP 65 opt.

A9075109  Add to my list
DATEC-MOBIL-BOX L, Vers. I

ABS (UL 94 HB)
black RAL 9005
9.92″x4.76″x1.97″
IP 65 opt.

A9075207  Add to my list
DATEC-MOBIL-BOX L, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
9.92″x4.76″x1.97″
IP 65 opt.

A9075209  Add to my list
DATEC-MOBIL-BOX L, Vers. II

ABS (UL 94 HB)
black RAL 9005
9.92″x4.76″x1.97″
IP 65 opt.

A9076107  Add to my list
DATEC-CONTROL XS, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″x1.56″
IP 65 opt.

A9076109  Add to my list
DATEC-CONTROL XS, Vers. I

ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″x1.56″
IP 65 opt.

A9076157  Add to my list
SET: DATEC-CONTROL XS, Vers. I,station..

ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″
IP 65 opt.

A9076159  Add to my list
SET: DATEC-CONTROL XS, Vers. I,station..

ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″
IP 65 opt.

A9076207  Add to my list
DATEC-CONTROL XS, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″x1.56″
IP 65 opt.

A9076209  Add to my list
DATEC-CONTROL XS, Vers. II

ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″x1.57″
IP 65 opt.

A9076257  Add to my list
SET: DATEC-CONTROL XS, Vers. II, station.

ABS (UL 94 HB)
off-white RAL 9002
7.87″x3.70″
IP 65 opt.

A9076259  Add to my list
SET: DATEC-CONTROL XS, Vers. II, station.

ABS (UL 94 HB)
black RAL 9005
7.87″x3.70″
IP 65 opt.

A9077107  Add to my list
DATEC-CONTROL S, Vers. I

ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″x1.85″
IP 65 opt.

A9077109  Add to my list
DATEC-CONTROL S, Vers. I

ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″x1.85″
IP 65 opt.

A9077157  Add to my list
SET: DATEC-CONTROL S, Vers. I, station..

ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″
IP 65 opt.

A9077159  Add to my list
SET: DATEC-CONTROL S, Vers. I, station..

ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″
IP 65 opt.

A9077207  Add to my list
DATEC-CONTROL S, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″x1.85″
IP 65 opt.

A9077209  Add to my list
DATEC-CONTROL S, Vers. II

ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″x1.85″
IP 65 opt.

A9077257  Add to my list
SET: DATEC-CONTROL S, Vers. II, station..

ABS (UL 94 HB)
off-white RAL 9002
8.98″x4.61″
IP 65 opt.

A9077259  Add to my list
SET: DATEC-CONTROL S, Vers. II, station..

ABS (UL 94 HB)
black RAL 9005
8.98″x4.61″
IP 65 opt.

A9093107  Add to my list
DIATEC S

ABS (UL 94 HB)
off-white RAL 9002
8.27″x1.89″x7.87″
IP 40

A9093108  Add to my list
DIATEC S

ABS (UL 94 HB)
lava
8.27″x1.89″x7.87″
IP 40

A9094107  Add to my list
DIATEC M

ABS (UL 94 HB)
off-white RAL 9002
10.63″x1.89″x7.87″
IP 40

A9094108  Add to my list
DIATEC M

ABS (UL 94 HB)
lava
10.63″x1.89″x7.87″
IP 40

A9095107  Add to my list
DIATEC L

ABS (UL 94 HB)
off-white RAL 9002
12.99″x1.89″x7.87″
IP 40

A9095108  Add to my list
DIATEC L

ABS (UL 94 HB)
lava
12.99″x1.89″x7.87″
IP 40

A9176128  Add to my list
Battery compartment XS, 2 x AA or 1 x 9V

ABS (UL 94 HB)

A9177310  Add to my list
Battery compartment, 1 x 9 V

ABS (UL 94 HB)

A9406332  Add to my list
SHELL-TYPE CASES G 110, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.30″

A9406334  Add to my list
SHELL-TYPE CASES V 110, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.30″

A9406342  Add to my list
SHELL-TYPE CASES G 110, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.77″

A9406344  Add to my list
SHELL-TYPE CASES V 110, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.77″

A9406352  Add to my list
SHELL-TYPE CASES G 110, Vers. II

ABS (UL 94 HB)
off-white RAL 9002
2.83″x4.49″x1.32″

A9408335  Add to my list
SHELL-TYPE CASES G 155, Vers. IV

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.30″

A9408336  Add to my list
SHELL-TYPE CASES V 155, Vers. IV

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.30″

A9408345  Add to my list
SHELL-TYPE CASES G 155, Vers. IV

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.77″

A9408346  Add to my list
SHELL-TYPE CASES V 155, Vers. IV

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.77″

A9408355  Add to my list
SHELL-TYPE CASES G 155, Vers. IV

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.32″

A9408638  Add to my list
SHELL-TYPE CASES V 155, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.30″

A9408648  Add to my list
SHELL-TYPE CASES V 155, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.77″

A9408737  Add to my list
SHELL-TYPE CASES G 155, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.30″

A9408747  Add to my list
SHELL-TYPE CASES G 155, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.77″

A9408757  Add to my list
SHELL-TYPE CASES G 155, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
3.74″x6.22″x1.32″

A9413638  Add to my list
SHELL-TYPE CASES V 190, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x1.77″

A9413648  Add to my list
SHELL-TYPE CASES V 190, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x2.68″

A9413737  Add to my list
SHELL-TYPE CASES G 190, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x1.77″

A9413747  Add to my list
SHELL-TYPE CASES G 190, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x2.68″

A9413757  Add to my list
SHELL-TYPE CASES G 190, Vers. V

ABS (UL 94 HB)
off-white RAL 9002
5.43″x7.48″x1.79″

B7010107  Add to my list
ERGO-CASE M, flat

ABS (UL 94 HB)
off-white RAL 9002
5.91″x3.94″x1.57″
IP 54 opt.

B7010109  Add to my list
ERGO-CASE M, flat

ABS (UL 94 HB)
black RAL 9005
5.91″x3.94″x1.57″
IP 54 opt.

B7015107  Add to my list
ERGO-CASE M, high

ABS (UL 94 HB)
off-white RAL 9002
5.91″x3.94″x2.17″
IP 54 opt.

B7015109  Add to my list
ERGO-CASE M, high

ABS (UL 94 HB)
black RAL 9005
5.91″x3.94″x2.17″
IP 54 opt.

B7020107  Add to my list
ERGO-CASE L, flat

ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.13″
IP 54 opt.

B7020109  Add to my list
ERGO-CASE L, flat

ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.13″
IP 54 opt.

B7020137  Add to my list
ERGO-CASE L, flat

ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.13″
IP 40

B7020139  Add to my list
ERGO-CASE L, flat

ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.13″
IP 40

B7020147  Add to my list
ERGO-CASE L, flat

ABS (UL 94 HB)
off-white RAL 9002
5.91″x7.87″x2.13″
IP 40

B7020149  Add to my list
ERGO-CASE L, flat

ABS (UL 94 HB)
black RAL 9005
5.91″x7.87″x2.13″
IP 40

A9074309

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top with display cutout for compact-LCD modules with 2 lines x 16 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9406344

Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A0620019

Three-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version
With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply
1 top and bottom part, lid of battery compartment, assembly kit

A9413747

Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9074209

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9072127

Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with locking battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

A9077109

Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version
With closed operating area, recess: 1.7 mm deep

Supply
Top and base part, battery compartment lid, assembly kit

A9077209

Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version
Top part with maximum sized cutout for display modules

Supply
Top and base part, battery compartment lid, assembly kit

A9406332

Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9074207

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A0615017

Three-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version
With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply
1 top and bottom part, lid of battery compartment, assembly kit

A9408345

Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply
1 top and base part, battery compartment lid, assembly kit

A9408757

Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9068107

Large, ergonomic hand-held box. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version
With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply
Case-top and base, battery compartment lid, assembly kit

A9077159

Enclosure-kit: DATEC-CONTROL S, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base S, 1 male contact (base) and 1 female contact (enclosure).

Supply
Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

A9093107

Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply
bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

A9060009

Successfully used case for measuring instruments. With recessed area for imprintings or your logo. Cut-out section for LCD or analogical modules. With battery compartment, accessible from the outside, for 9 V flat battery or 1.5 V baby cell (C) with contacts for soldering. Raised front area to accommodate plugs.

Version
With lateral recess for rocker switch

Supply
Top and base part, battery compartment lid, assembly kit

A9074127

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
top high with closed operating area, recessed by 1.7 mm.

Supply
Case-top and base, battery compartment lid, assembly kit

A9075207

Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Sealing for IP 65 as accessory.

Version
Top with display cutout for LCD modules of 20 characters x 4 lines

Supply
Case-top and base, battery compartment lid, assembly kit

A9061019

Large exclusive hand-held case. With recessed area e.g. for membrane keyboards, control elements. Battery compartment accessible from the outside with locked battery compartment lid. For 2 x 9 V flat batteries or 4 x 1.5 V mignon cells (AA). Cut-out section for digital and analogical modules. Raised front area to accommodate plugs.

Version
With battery compartment

Supply
Top and base part, battery compartment lid, assembly kit

A9073107

Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version
Top with closed operating area, recessed by 1.7 mm

Supply
Case-top and base, battery compartment lid, assembly kit

B7015109

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With high top part

Supply
1 top and 1 bottom part, battery compartment lid, assembly kit

B7020149

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With flat top part and display panel

Supply
1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

B7020107

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With flat top part

Supply
1 top and 1 bottom part, battery compartment lid, assembly kit

A9067107

Large, ergonomic handheld enclosure. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version
With battery compartment for two 1.5 V mignon cells (AA)or a 9 V flat battery

Supply
Case-top and base, battery compartment lid, assembly kit

A9074129

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top high with closed operating area, recessed by 1.7 mm

Supply
Case-top and base, battery compartment lid, assembly kit

A9074409

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top with display cutout for standard-LCD modules with 4 lines x 16 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9076157

Enclosure-kit: DATEC-CONTROL XS, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply
Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

B7015107

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With high top part

Supply
1 top and 1 bottom part, battery compartment lid, assembly kit

A9408747

Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9075209

Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Sealing for IP 65 as accessory.

Version
Top with display cutout for LCD modules of 20 characters x 4 lines

Supply
Case-top and base, battery compartment lid, assembly kit

A9046107

Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version
With closed operation area

Supply
Top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

A9075107

Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Sealing for IP 65 as accessory.

Version
Top with closed operating area, recessed by 2.2 mm

Supply
Case-top and base, battery compartment lid, assembly kit

A9060017

Successfully used case for measuring instruments. With recessed area for imprintings or your logo. Cut-out section for LCD or analogical modules. With battery compartment, accessible from the outside, for 9 V flat battery or 1.5 V baby cell (C) with contacts for soldering. Raised front area to accommodate plugs.

Version
Without lateral recess

Supply
Top and base part, battery compartment lid, assembly kit

A9067109

Large, ergonomic handheld enclosure. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version
With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply
Case-top and base, battery compartment lid, assembly kit

A9076107

Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down (battery compartment as accessory).

Version
With closed operating area, recess: 1.6 mm deep

Supply
Top and base part, battery compartment lid, assembly kit

A9408355

Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply
1 top and base part, battery compartment lid, assembly kit

A9408638

Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9408737

Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9072209

Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Front area for infra-red applications with utmost efficiency. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

A9408648

Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9095107

Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars in the bottom and top part. Integrated battery compartment for 2 x AA / 1 x 9 V. If required the hinged lid S can be mounted either on the right or on the left to partially cover the dialog area (on one side).

Supply
Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

A9075109

Hand-held box with wide range of applications. Prepared for mounting PCBs of Eurocard size. Large control area for membrane keyboards and controls. Battery compartment accessible from the outside, for 4 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Sealing for IP 65 as accessory.

Version
Top with closed operating area, recessed by 2.2 mm

Supply
Case-top and base, battery compartment lid, assembly kit

A9074227

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top high with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9177310

Application: for 1 x 9 V flat battery.

Supply
1 battery compartment, assembly kit

A9077157

Enclosure-kit: DATEC-CONTROL S, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base S, 1 male contact (base) and 1 female contact (enclosure).

Supply
Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

B7020109

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With flat top part

Supply
1 top and 1 bottom part, battery compartment lid, assembly kit

A9073407

Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version
Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9073409

Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version
Top with display cutout for miniature-LCDs with 4 lines x 20 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9074407

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top with display cutout for standard-LCD modules with 4 lines x 16 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9073209

Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version
Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply
Case-top and base, battery compartment lid, assembly kit

A9076259

Enclosure-kit: DATEC-CONTROL XS, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply
Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

A9413757

Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9062017

Small hand-held case with excellent design. With recessed area, e.g. for membrane keyboards, control elements. Cut-out section for digital and analogical modules. Battery compartment accessible from the outside with locked battery compartment lid. Raised front area to accommodate plugs.

Version
With battery compartment for 9 V flat batteries or 1.5 V baby cells (C)

Supply
Top and base part, battery compartment lid, assembly kit

A9068109

Large, ergonomic hand-held box. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part.

Version
With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply
Case-top and base, battery compartment lid, assembly kit

A9073309

Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version
Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9076109

Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version
With closed operating area, recess: 1.6 mm deep

Supply
Top and base part, battery compartment lid, assembly kit

A0620117

Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version
With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply
1 top and bottom part, lid of battery compartment, assembly kit

A9094107

Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply
Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

A9093108

Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply
Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

A9077107

Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version
With closed operating area, recess: 1.7 mm deep

Supply
Top and base part, battery compartment lid, assembly kit

B7010107

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With flat top part

Supply
1 top and 1 bottom part, battery compartment lid, assembly kit

A9077207

Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version
Top part with maximum sized cutout for display modules

Supply
Top and base part, battery compartment lid, assembly kit

A0615119

Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version
With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply
1 top and bottom part, lid of battery compartment, assembly kit

A9046209

Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version
With frame cover for the use of an aluminum-front panel (accessories)

Supply
Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

A9060007

Design: Successfully used case for measuring instruments. With recessed area for imprintings or your logo. Cut-out section for LCD or analogical modules. With battery compartment, accessible from the outside, for 9 V flat battery or 1.5 V baby cell (C) with contacts for soldering. Raised front area to accommodate plugs.

Version
With lateral recess for rocker switch

Supply
Top and base part, battery compartment lid, assembly kit

A9062019

Small hand-held case with excellent design. With recessed area, e.g. for membrane keyboards, control elements. Cut-out section for digital and analogical modules. Battery compartment accessible from the outside with locked battery compartment lid. Raised front area to accommodate plugs.

Version
With battery compartment for 9 V flat batteries or 1.5 V baby cells (C)

Supply
Top and base part, battery compartment lid, assembly kit

A9068209

Large, ergonomic hand-held box. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part. Polished front area for utmost effectiveness when exposed to infra-red light.

Version
With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply
Case-top and base, battery compartment lid, assembly kit

A9076257

Enclosure-kit: DATEC-CONTROL XS, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply
Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

A9072229

Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with locking battery compartment lid in case bottom. Front area for infra-red applications with utmost efficiency. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

A9074307

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top with display cutout for compact-LCD modules with 2 lines x 16 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9046109

Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version
With closed operation area

Supply
Top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

A9408346

Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply
1 top and base part, battery compartment lid, assembly kit

A9060019

Successfully used case for measuring instruments. With recessed area for imprintings or your logo. Cut-out section for LCD or analogical modules. With battery compartment, accessible from the outside, for 9 V flat battery or 1.5 V baby cell (C) with contacts for soldering. Raised front area to accommodate plugs.

Version
Without lateral recess

Supply
Top and base part, battery compartment lid, assembly kit

A9076159

Enclosure-kit: DATEC-CONTROL XS, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).

Supply
Bottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits

A9072119

Robust pocket box wit sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

A9067209

Large, ergonomic hand-held box. With recessed operating area for membrane keyboards. PCBs can be fixed in the top and base part. Polished front area for utmost effectiveness when exposed to infra-red light.

Version
With battery compartment for two 1.5 V mignon cells (AA) or a 9 V flat battery

Supply
Case-top and base, battery compartment lid, assembly kit

A9074107

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top with closed operating area, recessed by 1.7 mm

Supply
Case-top and base, battery compartment lid, assembly kit

A9046207

Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version
With frame cover for the use of an aluminum-front panel (accessories)

Supply
Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

A9076209

Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down.(battery compartment as accessory).

Version
Top part with maximum sized cutout for display modules

Supply
Top and base part, battery compartment lid, assembly kit

A9076207

Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version
Top part with maximum sized cutout for display modules

Supply
Top and base part, battery compartment lid, assembly kit

A9072129

Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with locking battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

A9074229

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top high with display cutout for standard-LCD modules with 2 lines x 16 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A0615117

Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version
With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply
1 top and bottom part, lid of battery compartment, assembly kit

A9072117

Robust pocket box with sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

B7010109

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With flat top part

Supply
1 top and 1 bottom part, battery compartment lid, assembly kit

B7020139

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With flat top part and with display panel

Supply
1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

A9072109

Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

A9072107

Robust pocket box without sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

A9077257

Enclosure-kit: DATEC-CONTROL S, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base S, 1 male contact (base) and 1 female contact (enclosure).

Supply
Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

A9413638

Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A0615019

Three-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version
With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply
1 top and bottom part, lid of battery compartment, assembly kit

A9406342

Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9077259

Enclosure-kit: DATEC-CONTROL S, version II with machining for the locator of the 6-pin contacts and secure connection, 1 base S, 1 male contact (base) and 1 female contact (enclosure).

Supply
Bottom and top part with display cutout, battery compartment lid, base, male contact, female contact, assembly kits

A9408336

Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply
1 top and base part, battery compartment lid, assembly kit

A9406352

Two-part plastic case with closed front and rear. Top view with recessed area. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9176128

Suitable for DATEC-CONTROL XS. An add-on battery compartment for 2 x 1.5 V mignon-cells (AA) or 1 x 9 V flat battery. It is secured without screws. After the upper and lower parts of the case have been mounted, it is held automatically. Set of battery clips (accessory).

Supply
1 battery compartment

B7020147

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With top top part and display panel

Supply
1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

A9094108

Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply
Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

A9095108

Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorized access. Recessed operating area to protect the membrane keyboard. Fastening pillars in the bottom and top part. Integrated supports for 2 x AA / 1 x 9 V. If required the hinged lid S can be mounted either on the right or on the left to partially cover the dialog area (on one side).

Supply
Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

A9413737

Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9073307

Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version
Top with display cutout for miniature-LCDs with 2 lines x 20 characters

Supply
Case-top and base, battery compartment lid, assembly kit

A9074109

Universally applicable hand-held box of medium size. Large area for cutouts and openings. Recessed control area for keyboards. Lid of battery compartment in the base (battery compartment as accessory). Sealing for IP 65 as accessory.

Version
Top with closed operating area, recessed by 1.7 mm

Supply
Case-top and base, battery compartment lid, assembly kit

A0620119

Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version
With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply
1 top and bottom part, lid of battery compartment, assembly kit

A0620017

Three-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 0.047" recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version
With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply
1 top and bottom part, lid of battery compartment, assembly kit

A9406334

Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment

Supply
1 top and base part, battery compartment lid, assembly kit

A9073207

Design: Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version
Top with display cutout for 2"-LC-modules with active area 45.8 x 17.8 mm

Supply
Case-top and base, battery compartment lid, assembly kit

A9408335

Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA)

Supply
1 top and base part, battery compartment lid, assembly kit

A9413648

Two-part plastic case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base.

Version
With battery compartment for 4 x 1.5 V mignon cells (AA) or 2 x 9 V flat batteries (PP3)

Supply
1 top and base part, battery compartment lid, assembly kit

A9072219

Robust pocket box with sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Front area for infra-red applications with utmost efficiency. Battery compartment for 1 x 9 V flat battery or 2 x 1.5 V mignon cell (AA).

Supply
Case-top and base, battery compartment lid, assembly kit

B7020137

Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version
With flat top part and display panel

Supply
1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

A9061017

Large exclusive hand-held case. With recessed area e.g. for membrane keyboards, control elements. Battery compartment accessible from the outside with locked battery compartment lid. For 2 x 9 V flat batteries or 4 x 1.5 V mignon cells (AA). Cut-out section for digital and analogical modules. Raised front area to accommodate plugs.

Version
With battery compartment

Supply
Top and base part, battery compartment lid, assembly kit

A9073109

Small hand-held box of attractive design. With integrated battery compartment for 2 x 1.5 V mignon cells (AA) or 1 x 9 V flat battery. Recessed operation area for protecting the input elements. Sealing for IP 65 as accessory.

Version
Top with closed operating area, recessed by 1.7 mm

Supply
Case-top and base, battery compartment lid, assembly kit