Search Your location/language U.S.A., English
A9421107 EVOTEC 100, Vers. I

A9421107

EVOTEC 100, Vers. I

2-part plastic enclosure with flat top part, height 1.024". Robust design with tongue and groove connection. Case assembled with Torx drive stainless steel screws. Fastening pillars for PCBs and components in the top and bottom parts.

Version

Top part "Flat"

Supply

Top and bottom parts, assembly kit incl. 4 self-adhesive rubber feet

  • Components/Accessories
  • View Customizing Options

Accessory "protection"

A9502030 Sealing 100

A9502030

Sealing 100 For increasing the protection class IP 65. Bottom part with groove accepts the seal.

Supply 1 seal

Close

A9502030

Sealing 100

Accessory "wall/holder"

B1300017 Fastening element for DIN-Rails

B1300017

Fastening element for DIN-Rails Especially for TOPTEC starting from size 123 F/H and EVOTEC 100/150. For fastening the cases to DIN-rails according to DIN EN 60715 (TH35, G32). Easy assembly. 2 boreholes ø 0.118" required.

Supply 1 piece incl, assembly kit

Close

B1300017

Fastening element for DIN-Rails PA 6
off-white RAL 9002

Accessory "screws"

A0305031 Self-tapping screws 0.098" x 0.236" (PZ1)

A0305031

Self-tapping screws 0.098" x 0.236" (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.
For correct assembly please note the tightening torque depends on enclosure type. View list (.xls) >>

Supply 1 self-tapping screw

Close

A0305031

Self-tapping screws 0.098" x 0.236" (PZ1)

Customizing options for A9421107

What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.

  • Technical Data
  • Drawings / Info
  • Purchasing Data
Protection class
IP 65 opt.
Necessary accessories: sealing, IP 40
Color
off-white RAL 9002
The degree(s) of protection listed refer to the empty standard enclosures (without any modifications) and are in compliance with the EN 60529 standard.
Length
3.937″
100 mm
Width
2.441″
62 mm
Height
1.024″
26 mm
PCB length, base
3.543″
90 mm
PCB width, base
1.969″
50 mm
PCB length, top
3.543″
90 mm
PCB width, top
1.969″
50 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.

Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

Weight/1 part
59 g
Customs tariff number
(OKW product)
39269097
Country of manufacture
Germany
trafficflow