Search Your location/language U.S.A., English
K0300012 Shoulder strap 330 / 340

K0300012

Shoulder strap 330 / 340

The shoulder strap can be used for carry cases 330 and 340 as well as Carrytec enclosures with separate brackets (B4308309). The upholstered strap is wedge-shaped in order to prevent the strap from slipping off the shoulder, and ensures optimum load distribution. The shoulder strap can easily be adjusted to the size of the user.

Samples free of charge are not available.

Supply

1 shoulder strap

  • To be used for
B4208107 CARRYTEC S

B4208107

CARRYTEC S Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Close

B4208107

CARRYTEC S ABS (UL 94 HB)
off-white RAL 9002
8.74″x8.07″x3.15″
IP 54 opt.
B4208208 CARRYTEC S

B4208208

CARRYTEC S Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Close

B4208208

CARRYTEC S ASA+PC-FR (UL 94 V-0)
lava
8.74″x8.07″x3.15″
IP 54 opt.
B4210107 CARRYTEC M

B4210107

CARRYTEC M Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Close

B4210107

CARRYTEC M ABS (UL 94 HB)
off-white RAL 9002
10.63″x9.72″x3.58″
IP 54 opt.
B4210127 CARRYTEC M slim version

B4210127

CARRYTEC M slim version Strong plastic enclosure with handle, slim version. Ideal for the installation of tablet computers and the like, which have modest space requirements and can be carried comfortably and securely in the Carrytec.
The top part is identical with that of the larger enclosure versions; only the bottom part is flatter.
Top part with recessed surface for using membrane keyboards. Attachment domes for PCBs and components in the top and bottom parts. Interface installation at the rear, for example for support arm applications, ensures orderly cable routing through enclosure connection.

Supply Top and bottom parts, TPE handle pad, assembly kit

Close

B4210127

CARRYTEC M slim version ABS (UL 94 HB)
off-white RAL 9002
10.63″x9.72″x1.65″
IP 54 opt.
B4210208 CARRYTEC M

B4210208

CARRYTEC M Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Close

B4210208

CARRYTEC M ASA+PC-FR (UL 94 V-0)
lava
10.63″x9.72″x3.58″
IP 54 opt.
B4210228 CARRYTEC M slim version

B4210228

CARRYTEC M slim version Strong plastic enclosure with handle, slim version. Ideal for the installation of tablet computers and the like, which have modest space requirements and can be carried comfortably and securely in the Carrytec.
The top part is identical with that of the larger enclosure versions; only the bottom part is flatter.
Top part with recessed surface for using membrane keyboards. Attachment domes for PCBs and components in the top and bottom parts. Interface installation at the rear, for example for support arm applications, ensures orderly cable routing through enclosure connection.

Supply Top and bottom parts, TPE handle pad, assembly kit

Close

B4210228

CARRYTEC M slim version ASA+PC-FR (UL 94 V-0)
lava
10.63″x9.72″x1.65″
IP 54 opt.
B4213107 CARRYTEC L

B4213107

CARRYTEC L Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, compatible with VESA standard (100 x 100 mm). Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Close

B4213107

CARRYTEC L ABS (UL 94 HB)
off-white RAL 9002
13.70″x11.93″x4.61″
IP 54 opt.
B4213208 CARRYTEC L

B4213208

CARRYTEC L Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, compatible with VESA standard (100 x 100 mm). Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Close

B4213208

CARRYTEC L ASA+PC-FR (UL 94 V-0)
lava
13.70″x11.93″x4.61″
IP 54 opt.
B4308309 Brackets

B4308309

Brackets Universal accessory for mounting a shoulder strap or something equivalent (separate article). Allows comfortable case carrying.
Fixing in 2 mounting holes: hole distance 0.681", ø 0.256". Minimum wall thickness of 0.118" necessary.

Supply 2 brackets, 4 screws and 4 washers

Close

B4308309

Brackets Plastic
black RAL 9005
K0300B30 Carry case 330 with handle

K0300B30

Carry case 330 with handle Reliable and fashionable transportation solution with a carrying handle as well as 2 eyelets for using the shoulder strap (accessory). Blanking caps (supplied with case) can be fitted instead of the eyelets. The carry case can be fitted with your logo or nameplate for your company branding (logo window, zipper).

Accessories are pouch (small) 330 / 340, pouch (transparent) 330 / 340, pouch (double) 330 / 340 and shoulder strap 330 / 340, see tab "Suitable System Components", products below "Accessory to complete".

Samples free of charge are not available.

Supply 1 carry case

Close

K0300B30

Carry case 330 with handle black
14.17″x10.43″x5.71″
K0300B32 Carry case 330 with foam insert set

K0300B32

Carry case 330 with foam insert set

Reliable and fashionable transportation solution with a carrying handle as well as 2 eyelets for using the shoulder strap (accessory). Blanking caps (supplied with case) can be fitted instead of the eyelets. The carry case can be fitted with your logo or nameplate for your company branding (logo window, zipper).
The already integrated foam insert set consists of a section with "egg-crate" foam, a pre-cut cubic foam section for individual customisation and a flat foam version.

Accessories are pouch (small) 330 / 340, pouch (transparent) 330 / 340, pouch (double) 330 / 340 and shoulder strap 330 / 340, see tab "Suitable System Components", products below "Accessory to complete".

Samples free of charge are not available.

Supply 1 carry case, 1 pc section with "egg-crate" foam, 1 pc firm grid foam high and 1 pc firm foam flat

Close

K0300B32

Carry case 330 with foam insert set black
14.17″x10.43″x5.71″
K0300B33 Carry case 330 with compartments and dividers

K0300B33

Carry case 330 with compartments and dividers

Reliable and fashionable transportation solution with a carrying handle as well as 2 eyelets for using the shoulder strap (accessory). Blanking caps (supplied with case) can be fitted instead of the eyelets. The carry case can be fitted with your logo or nameplate for your company branding (logo window, zipper).
The polyester compartments already integrated in the top part are ideal for keeping operating instructions, documents and the like, and have a Velcro fastening cover.
The modular partition set with Velcro fastener is ideal for the individual division of compartments and the internal organisation of small parts.

Accessories are pouch (small) 330 / 340, pouch (transparent) 330 / 340, pouch (double) 330 / 340 and shoulder strap 330 / 340, see tab "Suitable System Components", products below "Accessory to complete".

Samples free of charge are not available.

Supply 1 carry case with integrated compartments and Velcro fastening cover, 2 long partitions (vertical arrangement) and 3 short partitions (horizontal arrangement)

Close

K0300B33

Carry case 330 with compartments and dividers black
14.17″x10.43″x5.71″
K0300B40 Carry case 340 with handle

K0300B40

Carry case 340 with handle Largest version of the standard cases with a carrying handle as well as 2 eyelets for using the shoulder strap (accessory). Blanking caps (supplied with case) can be fitted instead of the eyelets. The carry case can be fitted with your logo or nameplate for your company branding (logo window, zipper).

Accessories are pouch (small) 330 / 340, pouch (transparent) 330 / 340, pouch (double) 330 / 340 and shoulder strap 330 / 340, see tab "Suitable System Components", products below "Accessory to complete".

Samples free of charge are not available.

Supply 1 carry case

Close

K0300B40

Carry case 340 with handle black
16.14″x14.37″x5.91″
K0300B42 Carry case 340 with foam insert set

K0300B42

Carry case 340 with foam insert set

Largest version of the standard cases with a carrying handle as well as 2 eyelets for using the shoulder strap (accessory). Blanking caps (supplied with case) can be fitted instead of the eyelets. The carry case can be fitted with your logo or nameplate for your company branding (logo window, zipper).
The already integrated foam insert set consists of a section with "egg-crate" foam, a pre-cut cubic foam section for individual customisation and a flat foam version.

Accessories are pouch (small) 330 / 340, pouch (transparent) 330 / 340, pouch (double) 330 / 340 and shoulder strap 330 / 340, see tab "Suitable System Components", products below "Accessory to complete".

Samples free of charge are not available.

Supply 1 carry case, 1 pc section with "egg-crate" foam, 1 pc firm grid foam high and 1 pc firm foam flat

Close

K0300B42

Carry case 340 with foam insert set black
16.14″x14.37″x5.91″
K0300B43 Carry case 340 with compartments and dividers

K0300B43

Carry case 340 with compartments and dividers

Largest version of the standard cases with a carrying handle as well as 2 eyelets for using the shoulder strap (accessory). Blanking caps (supplied with case) can be fitted instead of the eyelets. The carry case can be fitted with your logo or nameplate for your company branding (logo window, zipper).
The polyester compartments already integrated in the top part are ideal for keeping operating instructions, documents and the like, and have a Velcro fastening cover.
The modular partition set with Velcro fastener is ideal for the individual division of compartments and the internal organisation of small parts.

Accessories are pouch (small) 330 / 340, pouch (transparent) 330 / 340, pouch (double) 330 / 340 and shoulder strap 330 / 340, see tab "Suitable System Components", products below "Accessory to complete".

Samples free of charge are not available.

Supply 1 carry case with integrated compartments and Velcro fastening cover, 1 long partition (horizontal) and 4 short partitions (vertical arrangement)

Close

K0300B43

Carry case 340 with compartments and dividers black
16.14″x14.37″x5.91″
  • Technical Data
  • Purchasing Data
Length
62.992″
160 cm
Width
2.165″
55 mm
Height
0.197″
5 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
100 g
Customs tariff number
(OKW product)
39269097
Country of manufacture
China
trafficflow