Search Your location/language U.S.A., English
B4142005 Sealing S (bottom part - front design)

B4142005

Sealing S (bottom part - front design)

For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).

Supply

1 sealing

  • To be used for
B4042407 Cover S

B4042407

Cover S Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.

Supply 1 cover, assembly kit

Close

B4042407

Cover S ABS (UL 94 HB)
off-white RAL 9002
7.48″x5.31″x0.55″
B4042707 Bottom part S flat, version I

B4042707

Bottom part S flat, version I Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminum front panel (sep. article)

Supply 1 bottom part flat

Close

B4042707

Bottom part S flat, version I ABS (UL 94 HB)
off-white RAL 9002
7.48″x5.31″x0.96″
IP 54 opt.
B4042717 Bottom part S flat, version II

B4042717

Bottom part S flat, version II Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Close

B4042717

Bottom part S flat, version II ABS (UL 94 HB)
off-white RAL 9002
7.48″x5.31″x0.96″
IP 54 opt.
B4042757 Bottom part S high, version I

B4042757

Bottom part S high, version I Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminum front panel (sep. article)

Supply 1 bottom part high

Close

B4042757

Bottom part S high, version I ABS (UL 94 HB)
off-white RAL 9002
7.48″x5.31″x1.36″
IP 54 opt.
B4042767 Bottom part S high, version II

B4042767

Bottom part S high, version II Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Close

B4042767

Bottom part S high, version II ABS (UL 94 HB)
off-white RAL 9002
7.48″x5.31″x1.36″
IP 54 opt.
B4042827 Base S - desk-top -

B4042827

Base S - desk-top - Assembly unit: for case combinations with open bottom part vers. I or II. Case screwed to base. Assembly screws hidden from view. Ergonomically designed for operating and reading off. Assembly of the operating panel vertically or horizontally, depending on the application, see assembly instruction.

Supply 1 base, 2 covers, assembly kit

Close

B4042827

Base S - desk-top - ABS (UL 94 HB)
off-white RAL 9002
4.84″x4.84″x2.09″
B4042837 Base S - charging station, case deposit mobile

B4042837

Base S - charging station, case deposit mobile Assembly unit: Suitable for case with battery compartment or bottom panel with handle recess. Ergonomically designed for desktop and for wall mounting favorable. Can be equipped either for installing the case for desktop applications or with a snap-in mechanism for secure wall mounted and desktop applications. Case position vertically or horizontally, depending on the application - see assembly instruction. Contacts for simple data and charging current transfer as accessories.

Supply 1 base, 1 base cover, 2 covers, assembly kit

Close

B4042837

Base S - charging station, case deposit mobile ABS (UL 94 HB)
off-white RAL 9002
4.84″x4.84″x2.36″
B4042847 Base S - desk-top/wall -

B4042847

Base S - desk-top/wall - Assembly unit: for case combinations with bottom panel and snap-in strips. Case snaps into the base in vertical or horizontal position, depending on the application - see assembly instruction. If required, unit can be secured by latch lock. Ergonomically designed for operating and reading off. Direct wall mounting.

Supply 1 base, 2 clips, assembly kit

Close

B4042847

Base S - desk-top/wall - ABS (UL 94 HB)
off-white RAL 9002
4.84″x4.84″x2.09″
B4142047 Battery compartment and lid S, 5 x AA

B4142047

Battery compartment and lid S, 5 x AA Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.

Supply 1 battery compartment and lid, assembly kit

Close

B4142047

Battery compartment and lid S, 5 x AA ABS (UL 94 HB)
off-white RAL 9002
B4142106 Front panel S

B4142106

Front panel S Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4142106

Front panel S Aluminum
matt anodized
7.34″x5.18″x0.08″
B4142107 Front panel S

B4142107

Front panel S Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Close

B4142107

Front panel S ABS (UL 94 HB)
off-white RAL 9002
7.50″x5.34″x0.57″
B4142167 Bottom panel with handle recess S

B4142167

Bottom panel with handle recess S Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, assembly kit

Close

B4142167

Bottom panel with handle recess S ABS (UL 94 HB)
off-white RAL 9002
B4142203 Glass panel S

B4142203

Glass panel S Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Close

B4142203

Glass panel S Glass
clear
7.50″x5.34″x0.66″
B4142247 Wall suspension element S

B4142247

Wall suspension element S Hidden wall mounting. While closed, the entire case (version with battery compartment or base plate with handle recess) can be mounted on the wall, fixed and also removed again by means of the wall suspension element.

Supply 1 wall suspension element with snap-in mechanism

Close

B4142247

Wall suspension element S ABS (UL 94 HB)
off-white RAL 9002
B4142257 Bottom panel with snap-in strips S

B4142257

Bottom panel with snap-in strips S Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, 2 snap-in strips, assembly kit

Close

B4142257

Bottom panel with snap-in strips S ABS (UL 94 HB)
off-white RAL 9002
B4142587 Installation assembly kit S, flat

B4142587

Installation assembly kit S, flat For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, flat

Supply 4 holders, assembly kit, design frame

Close

B4142587

Installation assembly kit S, flat ABS (UL 94 HB)
off-white RAL 9002
9.21″x7.28″
B4142597 Installation assembly kit S, high

B4142597

Installation assembly kit S, high For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, high

Supply 4 holders, assembly kit, design frame

Close

B4142597

Installation assembly kit S, high ABS (UL 94 HB)
off-white RAL 9002
9.21″x7.28″
  • Technical Data
  • Drawings / Info
  • Purchasing Data
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.

Assembly Instructions (Group)

External Accessory - LCD Modules

Weight/1 part
8 g
Customs tariff number
(OKW product)
40169300
Country of manufacture
Germany
trafficflow