Advanced Search Part-No.
Login / Registration Your location/language Canada, English
B4146203 Glass panel L

B4146203

Glass panel L

Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version

Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply

1 glass panel incl. mounting frame and adhesive foil

  • Components/Accessories
  • View Customizing Options

Mobile with battery compartment

Mobile without battery compartment

Mobile with station

Mobile / Wall

Desk-top (screw-type connection)

Desk-top / Wall

Installation

Minimum components
1 bottom part, vers. I.
1 front design (cover).
1 bottom panel.
1 installation assembly kit.

or

1 bottom part, vers. II.
1 front design (front panel ABS or glass panel).
1 bottom panel.
1 installation assembly kit.

System components to complete

B4046717 Bottom part L flat, version II

B4046717

Bottom part L flat, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Close

B4046717

Bottom part L flat, version II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
10.83″x7.68″x1.04″
IP 54 opt.
B4046767 Bottom part L high, version II

B4046767

Bottom part L high, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Close

B4046767

Bottom part L high, version II
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
10.83″x7.68″x1.44″
IP 54 opt.
B4146257 Bottom panel with snap-in strips L

B4146257

Bottom panel with snap-in strips L Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, 2 snap-in strips, assembly kit

Close

B4146257

Bottom panel with snap-in strips L
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
B4146587 Installation assembly kit L, flat

B4146587

Installation assembly kit L, flat For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, flat

Supply 4 holders, assembly kit, design frame

Close

B4146587

Installation assembly kit L, flat
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
12.80″x9.88″
B4146597 Installation assembly kit L, high

B4146597

Installation assembly kit L, high For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, high

Supply 4 holders, assembly kit, design frame

Close

B4146597

Installation assembly kit L, high
product added to your basket
ABS (UL 94 HB)
off-white RAL 9002
12.80″x9.88″

Accessory "protection"

B4146005 Sealing L (bottom part - front design)

B4146005

Sealing L (bottom part - front design) For a higher protection class. Suitable between bottom part and front design (cover / aluminum front panel / ABS front panel or glass panel).

Supply 1 sealing

Close

B4146005

Sealing L (bottom part - front design)
product added to your basket
SEBS (TPE)
B4146006 Sealing L (bottom part - base/bot. panel/bat. comp...)

B4146006

Sealing L (bottom part - base/bot. panel/bat. comp...) For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).

Supply 1 sealing

Close

B4146006

Sealing L (bottom part - base/bot. panel/bat. comp...)
product added to your basket
SEBS (TPE)

Customizing options for B4146203

What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.

  • Technical Data
  • Drawings / Info
  • Purchasing Data
Material
Color
clear
Width
10.850″
275.6 mm
Depth
7.701″
195.6 mm
Height
0.697″
17.7 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.

Assembly Instructions (Group)

Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

Weight/1 part
550 g
Customs tariff number
(OKW product)
70060010
Country of manufacture
Germany