Accessories for enclosures
C2016162
ROBUST-BOX WIDTH 6.299", Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.031" for use of membrane keyboards.
Supply2 case shells with sealing, cover strips top and bottom, assembly kit
Generate Your PDF Datasheet for C2016162
Please select the product details you would like to include in the PDF.
Accessory "protection"
C2299040
Supply 1 plug
C2299040
Security pluglight gray RAL 7035
C2299046
Supply 4 plugs, 2 cover strips with holes for the top
C2299046
Security kit width 6.299"light gray RAL 7035
C2306917
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply 1 pressure equalization element, 1 seal washer, 1 nut
C2306917
Pressure equalization element M6x0.030"light gray RAL 7035
C2310917
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply 1 pressure equalization element, 1 seal washer, 1 nut
C2310917
Pressure equalization element M10x0.039"light gray RAL 7035
Accessory "wall/holder"
A9325018
For the secure and stable mounting of IP rated electronic enclosures to poles, masts, and pipes using cable ties or stainless steel screw bands, suitable for pole diameters from 30 mm. The bracket is attached to the rear of the enclosure (four drilled holes required) and is manufactured from UV resistant material.
Note:
Every application (environment, sealing requirements, enclosure size/version, mast diameter, etc.) is different. For this reason, no mounting screws, cable ties or stainless steel screw bands are supplied; only the mast/pipe bracket is included. However, on request, we can provide a wide range of solutions tailored precisely to the intended application.
Supply 1 pole/mast mounting bracket
A9325018
Pole/mast mounting bracketanthracite gray RAL 7016
3.94″x3.94″x0.79″
C2204168
Supply 2 fastening elements, assembly kit
C2204168
Fastening elements to DIN-Railslight gray RAL 7035
C2299028
Supply 4 pieces including fixing elements
C2299028
Wall mounting bracketslight gray RAL 7035
C2299031
Use with ROBUST BOX: the cover retention device can be mounted either on the right, left, top or bottom. Not suitable for sizes 7.874" x 11.811" and 9.449" x 14.173".
Use with SOLID BOX: pre-moulded mounts for installation on the long sides of the bottom and top parts.
Supply 2 securing hinges
C2299031
Securing hinge for the covernatural-colored
C2299088
Supply 2 complete hinges
C2299088
Hingelight gray RAL 7035
Accessory "screws"
A0306031
Supply 1 self-tapping screw
A0306031
Self-tapping screws 0.118" x 0.236" (PZ1)
A0308031
Supply 1 self-tapping screw
A0308031
Self-tapping screws 0.118" x 0.315" (PZ1)
A0308132
Supply 1 self-tapping screw
A0308132
Self-tapping screw 0.118" x 0.315" (T10)Accessory
C2204162
Supply 2 cover strips with holes, 2 cover strips without holes
C2204162
Cover strips 6.299"silver gray RAL 7001
C2204164
Supply 2 cover strips with holes, 2 cover strips without holes
C2204164
Cover strips 6.299"red RAL 3020
C2204165
Supply 2 cover strips with holes, 2 cover strips without holes
C2204165
Cover strips 6.299"yellow RAL 1023
C2204166
Supply 2 cover strips with holes, 2 cover strips without holes
C2204166
Cover strips 6.299"green RAL 6024
C2204167
Supply 2 cover strips with holes, 2 cover strips without holes
C2204167
Cover strips 6.299"blue RAL 5017
C2299018
Supply 4 case feet
C2299018
Case feet
C2299068
Supply 4 PCB support, assembly kit (threaded bushes, screws)
C2299068
PCB supportlight gray RAL 7035
Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- PDF-File (without registration) 341 KB
- AutoCAD DWG-File 459 KB
- AutoCAD DXF-File 1,776 KB
- 3D PDF View (Acrobat Reader) (turn the product 360°, blind components out for inside view, view accessories...) 8,317 KB
3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- 00008090.x_t 4,798 KB
- 00008090.STEP 10,772 KB
- 00008090.SAT 20,373 KB
(OKW product)
Customizing service: We can modify our enclosures to meet your specific requirements. We will deliver your enclosures fully finished and ready to use. All you have to do is install your equipment inside. View customizing options for C2016162 and don't forget to request a quotation!